And induction timeThe expression studies were performed in presence of all amino acids except leucine and isoleucine as we previously described these conditions to be beneficial for recombinant purchase A-196 membrane protein accumulation [34]. Whole cell hAQP1-GFP fluorescence was used to determine the kinetics of accumulation of functional hAQP1with respect to induction temperature. Figure 2 shows thatNi-affinity purification of recombinant human AquaporinCYMAL-5 solubilized Aquaporin-1 protein was diluted ten times in buffer A (50 mM phosphate and 500 mM NaCl pH 7.5) containing 10 mM imidazole and incubated overnight at 4uC with Ni-NTA Superflow (Qiagen, Germany). A CellThru Disposable Column (Clontech, USA) was packed with the Ni-NTA slurry. The column was washed with ten volumes of buffer A containing 10 mM imidazole and 0.75 mg/ml CYMAL-5, 30 volumes of buffer A with 30 mM imidazole and 0.75 mg/ml CYMAL-5, seven volumes of buffer A with 100 mM imidazole and 0.75 mg/ ml CYMAL-5. Protein was eluted 
with three volumes of buffer A containing 250 mM imidazole and 0.75 mg/ml CYMAL-5 and subsequently with three volumes of buffer A with 500 mM imidazole and 0.75 mg/ml CYMAL-5. Eluted AQP1-GFP-8His protein was collected in fractions of 200 ml. All buffers contained 1 mM PMSF, 1 mg/ml Pepstatin, 1 mg/ml Chymostatin and 1 mg/ml Leupeptin.Figure 1. Structural map of the Aquaporin-1 expression plasmid pPAP8230. Abbreviations used: CYC-GALP, a hybrid promoter carrying the GAL10 upstream activating sequence fused to the 5′ non-translated leader of the cytochrome-1 gene; K, Kozak sequence from the yeast PMR1 gene; hAQP1, coding part of human aquaporin 1 cDNA without a translational stop codon; GFP-His, termination codon deficient yeast enhanced GFP cDNA fused in-frame to eight histidine codons; 2 m, the yeast 2 micron origin of replication; leu2-d, a poorly expressed allele of the b-isopropylmalate dehydrogenase gene; bla, a ?lactamase gene; pMB1, the pMB1 origin of replication; URA3, the orotinin-5′-P decarboxylase gene. doi:10.1371/journal.pone.0056431.gHigh Level Human Aquaporin Production in YeasthAQP1-GFP accumulates to a very high density at 15uCQuantification of the in-gel fluorescence data in Figure 3A showed that correctly folded hAQP1-GFP accumulated in yeast membranes at 15uC even up till 124 hours after induction (data not shown). In order to determine if the membrane density of hAQP1-GFP protein kept increasing we 
quantified the time dependent accumulation of hAQP1-GFP produced at 15uC in crude membranes. It can be seen from Figure 4 that the density continued to increase for at least up till two weeks after induction, and that the density reached almost 1,500 pmol hAQP1-GFP per mg crude membranes. This corresponds to 8.5 of the total membrane protein content. The intense green color emitted from the crude membrane preparation shown in Figure 4 visualizes the high membrane density of the hAQP1-GFP fusion protein.Figure 2. Time and temperature dependent accumulation of hAQP1-GFP in intact yeast cells. MedChemExpress 57773-63-4 Briefly, yeast was inoculated in 2.5 liter shake flasks at room temperature to OD450 = 0.08 in 1 liter galactose-free expression medium (3 glycerol, 0.5 glucose minimal medium supplemented with all amino acids except leucine and isoleucine). At OD450 = 1.0 (time zero) half of the culture was transferred to 15uC and the other half to 30uC. Aquaporin expression was induced with 2 galactose 15 minutes later to assure that temperature equilibrium was.And induction timeThe expression studies were performed in presence of all amino acids except leucine and isoleucine as we previously described these conditions to be beneficial for recombinant membrane protein accumulation [34]. Whole cell hAQP1-GFP fluorescence was used to determine the kinetics of accumulation of functional hAQP1with respect to induction temperature. Figure 2 shows thatNi-affinity purification of recombinant human AquaporinCYMAL-5 solubilized Aquaporin-1 protein was diluted ten times in buffer A (50 mM phosphate and 500 mM NaCl pH 7.5) containing 10 mM imidazole and incubated overnight at 4uC with Ni-NTA Superflow (Qiagen, Germany). A CellThru Disposable Column (Clontech, USA) was packed with the Ni-NTA slurry. The column was washed with ten volumes of buffer A containing 10 mM imidazole and 0.75 mg/ml CYMAL-5, 30 volumes of buffer A with 30 mM imidazole and 0.75 mg/ml CYMAL-5, seven volumes of buffer A with 100 mM imidazole and 0.75 mg/ ml CYMAL-5. Protein was eluted with three volumes of buffer A containing 250 mM imidazole and 0.75 mg/ml CYMAL-5 and subsequently with three volumes of buffer A with 500 mM imidazole and 0.75 mg/ml CYMAL-5. Eluted AQP1-GFP-8His protein was collected in fractions of 200 ml. All buffers contained 1 mM PMSF, 1 mg/ml Pepstatin, 1 mg/ml Chymostatin and 1 mg/ml Leupeptin.Figure 1. Structural map of the Aquaporin-1 expression plasmid pPAP8230. Abbreviations used: CYC-GALP, a hybrid promoter carrying the GAL10 upstream activating sequence fused to the 5′ non-translated leader of the cytochrome-1 gene; K, Kozak sequence from the yeast PMR1 gene; hAQP1, coding part of human aquaporin 1 cDNA without a translational stop codon; GFP-His, termination codon deficient yeast enhanced GFP cDNA fused in-frame to eight histidine codons; 2 m, the yeast 2 micron origin of replication; leu2-d, a poorly expressed allele of the b-isopropylmalate dehydrogenase gene; bla, a ?lactamase gene; pMB1, the pMB1 origin of replication; URA3, the orotinin-5′-P decarboxylase gene. doi:10.1371/journal.pone.0056431.gHigh Level Human Aquaporin Production in YeasthAQP1-GFP accumulates to a very high density at 15uCQuantification of the in-gel fluorescence data in Figure 3A showed that correctly folded hAQP1-GFP accumulated in yeast membranes at 15uC even up till 124 hours after induction (data not shown). In order to determine if the membrane density of hAQP1-GFP protein kept increasing we quantified the time dependent accumulation of hAQP1-GFP produced at 15uC in crude membranes. It can be seen from Figure 4 that the density continued to increase for at least up till two weeks after induction, and that the density reached almost 1,500 pmol hAQP1-GFP per mg crude membranes. This corresponds to 8.5 of the total membrane protein content. The intense green color emitted from the crude membrane preparation shown in Figure 4 visualizes the high membrane density of the hAQP1-GFP fusion protein.Figure 2. Time and temperature dependent accumulation of hAQP1-GFP in intact yeast cells. Briefly, yeast was inoculated in 2.5 liter shake flasks at room temperature to OD450 = 0.08 in 1 liter galactose-free expression medium (3 glycerol, 0.5 glucose minimal medium supplemented with all amino acids except leucine and isoleucine). At OD450 = 1.0 (time zero) half of the culture was transferred to 15uC and the other half to 30uC. Aquaporin expression was induced with 2 galactose 15 minutes later to assure that temperature equilibrium was.